October - Extending the "Pringle" Display

After posting about the "Pringle" Display (using 2 Pringle tubes), I found I needed more space to properly display the sets of jewellery for my stall  at the Caddonfoot Coffee & Crafts. I realised that I could use a third tube, with holes in opposite sides, as a way to extend the display without completely having to re-think the design, etc.

Using this idea, you could create several extender tubes and make the display as long as you want, with the original tubes at each end. Or if you wanted a round/square/shaped display you could just use the extender tubes and join the first and last together with more wooden skewers.

You will need: Materials:
1 x Pringle tube
25cm wooden skewers (you'll need 10 per tube)
Self-adhesive Marble effect (or other 'look' of your choice)
Equipment:
Scissors
Craft knife
Ruler
Tape measure (for dressmaking)
Drill (+ jumbo lolly stick)
Pencil
Marker pen

See the original post for full instructions. Remember to make the holes on BOTH sides of the tube before applying Marble effect.

There you have it - an Extendable "Pringle" Display!

Please leave a comment below if you give this project a go, I'd love to hear how you get on...